Table of Contents
Advertisement
5.7
Factory settings, system upgrade
Resetting the device to the factory settings
It is possible to reset the device to the factory settings. Note that all configuration data is
deleted in the process. Press and release the user button (X11) 5 times within 10 seconds to
reset the Gateway to the factory settings.
Factory settings can also be set via the web user interface:
If the password has been forgotten, it can be reset through a reset to the factory settings.
System upgrade
Any updated software versions are available in the Sie-Portal (https://sieportal.siemens.com/).
You can update the software via the configuration interface:
SIMATIC FDE Gateway
Operating Instructions, 02/2023, A5E52308942-AB
Software and commissioning
5.7 Factory settings, system upgrade
43
Advertisement
Table of Contents
