Maintenance and diagnostics
9.3.2
File commands
58
Building Technologies
Fire Safety & Security Products
These commands are meant for remote technical maintenance and diagnostic of
the NK82xx units. The commands apply to the file selection active in the list on the
left hand side of the screen.
Download file
Transfer the selected file from the NK82xx.
Upload file
Transfer the selected file to the NK82xx (see how to upload log files in 9.3.3 be-
low).
Delete/rename file
Delete or Rename the selected file in the NK82xx.
Refresh
Update the file list.
Properties
Display the detailed properties if the selected file.
Download Reset NK
Download a file that forces the NK82xx to perform a software reset.
Edit Configuration File
Edit/View the INI file containing the NK82xx configuration.
Edit Diagno.log
Edit/View the diagnostic log file (see also 9.3.3 below).
Edit EEprom.log Event.log
Edit/View the log files (see also 9.3.3 below).
048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
06.2011