FarmTek HydroCycle 9" Pro Vertical Microgreen System 10' Manual page 20

Assemble and Install Nutrient Supply Manifold
6
ASSEMBLE AND INSTALL NUTRIENT SUPPLY MANIFOLDS—CONTINUED
12. Wrap the threaded end of each 109242 adapter three or four times with the WR1095 tape. Wrap in a direction
that will not loosen when adapter is installed. There are 48 adapters needed for this system.
Wrap threads of adapters with tape.
13. Using the WF4790 key punch, carefully install the adapters in each of the manifold pipes. Do not overtighten! Adapters
will snap off. Once slight resistance is felt during installation, stop tightening the adapter.
14. Apply pvc primer and cement to each end of one manifold pipe and fittings. Reassemble manifold using fittings for that
pipe. Use the marks to position the fittings as they were before manifold was disassembled. Set the assembly aside and
repeat the step to reassemble all manifolds. Allow cement to set before continuing with the next step.
PVC Primer & Cement
20
20
Install adapters using WF4790 key punch.
WF4790
Key Punch
WR1095
Tape
Alignment
Marks
PVC Primer & Cement
115277 Revision date: 09.25.18
109242
Adapters