FarmTek HydroCycle 9" Pro Vertical Microgreen System 10' Manual page 2

READ THIS DOCUMENT BEFORE YOU BEGIN
Thank you for purchasing the vertical microgreen system. When properly assembled and maintained, this product will provide years of reliable service. These
instructions include helpful hints and important information needed to safely assemble and properly maintain the system. Please read these instructions before
you begin. If you have any questions during the assembly, contact Customer Service at 1.800.245.9881 for assistance.
SAFETY PRECAUTIONS
• Wear eye protection.
• Wear gloves when handling metal pipes.
• Use a portable GFCI (Ground Fault Circuit
Interrupter) when working with power tools and
cords.
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the microgreen system. Additional tools and
supports may be needed.
• Level (4'– recommended)
• Wrench set to set adjustable feet
• Ratchet with 1/2" socket to assemble frame
• 3/16" hex (Allen) wrench
• 5/16" drill bit
• Small hammer and gloves
• Cutting tool to cut pvc tubing
• Adjustable pliers
• 1-3/8", 2-1/4" and 2-1/2" hole saw bits
• Adjustable supports or saw horses for channel
assembly.
2
Important Information
ASSEMBLY PROCEDURE
Following the instructions as presented will help
ensure the proper assembly of your microgreen
system. The steps outlining the assembly process are
as follows:
1. Verify that all parts are included in the shipment.
Notify customer service for questions or
concerns.
2. Read these instructions and all additional
documentation included with the shipment before
you begin.
3. Gather the tools and assistants.
4. For best results, assemble the components in the
order they are presented in these instructions.
5. Read the care and maintenance information.
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin assembly.
1. Unpack the contents of the shipment and place
where you can easily inventory the parts. Refer
to the Bill of Materials/Spec Sheets.
2. Verify that all parts listed on the Bill of Materials/
Spec Sheets are present. If anything is missing
or you have questions, consult the Pictorial
Parts Guide and all diagrams for clarification, or
contact Customer Service.
NOTE: At this time, you do not need to open
the plastic bags containing smaller parts such
as fasteners or washers (if equipped).
CARE AND MAINTENANCE
Proper care and maintenance of your
microgreen system is important. Check
the following items periodically to properly
maintain your microgreen system.
• Check connections and all fasteners to
verify that they remain tight.
• Do not climb or stand on the frame or
channels at anytime.
• Verify that the supply lines and related
fittings are clean and functioning properly.
• Replace all worn or damaged parts and
fittings promptly.
• Repair all leaks immediately.
• If system is moved, inspect all parts and
connections before reassembling and use.
• For replacement or missing parts, call
1.800.245.9881 for assistance.
QUICK START GUIDE
For a quick overview of this product, its
components, and connection details consult
the Quick Start Guide at the back of these
instructions.
WARNING: All electrical wiring to be
completed by a qualified electrician
and according to recongnized local
building codes..
115277 Revision date: 09.25.18