Connecting And Disconnecting; Connecting; Hydraulics; Disconnection - DAL-BO MaxiCut 200 Instruction Manual

Connecting

Remember to secure drawbar with balls and split pins.

Hydraulics

MaxiCut requires a double-acting hydraulic outlet, in which one line is used
for lowering the side sections and other for towing the frame to transport the
roller from field to field.
Table 1. Hose markings
Check hydraulic hoses for crimping

Disconnection

Fit support leg vertically, release drawbar from tractor and disconnect hydrau-
lic hoses.

Connecting and disconnecting

MaxiCut is attached to the tractor's
lifting arms and secured using
balls and split pins (A). The sup-
port leg (B) is raised and secured
by a pin (C). MaxiCut 200/300
coupled so that the drum section,
always preferred to in paragraph
(D).
Cylinder name Colour Outlet
Wheel Yellow Double acting
frame cylinder
Extend/retract Red
MaxiCut
B
Fig.2
C
D
Double acting
A
Function
Raises MaxiCut up onto its
wheels and down into work-
ing position.
Retracts the sides
wards/downwards.
Side 13
up-