Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
microSD
card.
4. Follow the procedure in
LED board
Removing the LED board
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the ssd.
6. Remove the
ssd
bracket.
7. Remove the
palmrest
Steps
1. Unlock and disconnect the USH cable from the pamlrest [1,2].
60
Disassembly and reassembly
after working inside your
before working inside your computer
card.
bracket.
computer.