Led Board; Removing The Led Board - Dell Precision 3561 X2CND Service Manual

5. Route the antennas cable through the routing guides on the assembly inner frame.
6. Align and place the metal bracket next to the WWAN card slot.
7. Replace the single (M2x3) screw to secure the metal bracket to the system board and the palm-rest assembly.
Next steps
1. Install the battery.
2. Install the hard drive.
3. Install the WWAN card.
4. Install the WLAN card.
5. Install the base cover.
6. Install the microSD card.
7. Install the SIM card.
8. Follow the procedure in

LED board

Removing the LED board

Prerequisites
1. Follow the procedure in
2. Remove the SIM card.
3. Remove the microSD
4. Remove the base cover.
5. Remove the WLAN card.
6. Remove the WWAN card.
7. Remove the battery.
8. Remove the hard drive.
9. Remove the assembly inner
About this task
The following image indicates the location of the LED board and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
card.
frame.
computer.
computer.
Removing and installing components 45