CEStronics OMEGA FLEX Manual page 25

6 Executing firmware update for Smart shield SIS
If the e-module lights up red-green simultaneously, it is ready for the update.
4. Start the update program OMEGA Firmware Update.
Start firmware-Update
1. Open the program OMEGA F
2. Select the desired device category.
3. Select the desired product.
4. Select the desired programming device with which you want to transmit the firmware
update.
5. Select the desired firmware.
6. Click on U
PDATE
If the selected device and a matching programming device are connected, the firmware
update will now be transmitted.
5. Wait till the OMEGA Firmware Update displays the message that the update was
transmitted successfully.
The locking device restarts now. It is then ready for operation with new firmware.
6. Re-insert the e-module into the SIS handle set.
Insert e-module and assemble the SIS handle set
Inserting and assembling the e-module
Programming Adaptor
U
IRMWARE PDATE
.
1. Insert the
.
- .
E MODULE
Make sure that the e-module locks firmly into
place.
Page 25 of 30