CEStronics OMEGA FLEX Manual page 12

Starting the firmware-Update
1. Open the program OMEGA F
2. Select the desired device category.
3. Select the desired product.
4. Select the desired programming device with which you want to transmit the firmware
update.
5. Select the desired firmware.
6. Click on U
PDATE
If the selected device and a matching programming device are connected, the firmware
update will now be transmitted.
5. Wait till the OMEGA Firmware Update displays the message that the update was
transmitted successfully.
6. Remove the knob from the programming device.
7. Remove the battery from the device.
Use the battery strap to remove the batteries.
Do not use any foreign object to remove the batteries.
8. Reassemble the electronic knob.
Assembling the electronic knob
Assembling an electronic knob on an assembled cylinder
Page 12 of 30
U
IRMWARE PDATE
.
1. Place the
4 Executing firmware updates for Cylinder
.
on the cylinder.
ELECTRONIC KNOB
If you touch the knob electronic, it can be
damaged. Therefore, hold the knob electronics
only within the marked area:
Programming Adaptor