CEStronics OMEGA FLEX Manual page 17

5 Executing firmware updates for Long shield ILS
Remove e-module
Removal of e-module (using a shield for long-hole bores as an example)
Programming Adaptor
6. Pull off the
OUTSIDE FITTING
door.
1. Remove the fixing screws from the outside
fitting.
In case the Long shield ILS was attached to a
rosette bore, you must first remove the
COUNTERSUNK HEAD SCREWS
2. Using the Allen key, loosen the
and remove the
SCREWS
.
OUTSIDE FITTING
on the outer side of the
(see next step).
COUNTERSUNK HEAD
from the
ASSEMBLY PLATE
Page 17 of 30