CEStronics OMEGA FLEX Manual page 18

3. Connect one of the both sockets of the Programming Adaptor to the e-module.
Connecting the e-module to the Programming Adaptor
Connecting the e-module to the Programming Adaptor
If the e-module lights up red-green simultaneously, it is ready for the update.
Page 18 of 30
5 Executing firmware updates for Long shield ILS
3. Push out the -
E MODULE
4. Remove the plug from the
1. Connect the supplied connection cable to one of
the two sockets of the Programming Adapter.
2. Connect the connection cable to the e-module.
The e-module is now connected to the Programming
Adaptor.
from the .
OUTSIDE FITTING
- .
E MODULE
Programming Adaptor