CEStronics OMEGA FLEX Manual page 24

3. Connect the e-module to the Programming Adaptor.
Connecting the e-module to the Programming Adaptor
Connecting e-module to the Programming Adaptor
Page 24 of 30
6 Executing firmware update for Smart shield SIS
4. Remove the batteries.
Remove the batteries only by hand. Do not use
any foreign objects for this.
5. Remove the - .
E MODULE
1. Connect the supplied connection cable to one of
the two sockets of the Programming Adapter.
2. Connect the connection cable to the e-module.
The e-module is now connected to the Programming
Adaptor.
Make sure to use the vertical cable socket.
Programming Adaptor