Executing Firmware Update For Smart Shield Sis - CEStronics OMEGA FLEX Manual

6 Executing firmware update for Smart shield SIS

6 Executing firmware update for Smart shield SIS

Required programming device: Programming Adaptor (ILS/SIS)
1. Connect the Programming Adaptor to your PC.
If you are connecting the Programming Adaptor for the first time to the PC, the driver will be
installed automatically now. You can then use the Programming Adaptor.
2. Dismantle the SIS handle set and remove the e-module.
Dismantling the SIS handle set and remove the e-module
Dismantling and removal of the e-module
Programming Adaptor
1. Loosen the
FIXTURE RING
2. Remove the
FIXTURE RING
3. Disconnect the
CABLE PLUG
with the CES spanner.
RING
and SIS Shield.
THE
from the
CABLE SOCKET
Page 23 of 30
.