5 Executing firmware updates for Long shield ILS
5 Executing firmware updates for Long shield ILS
Required programming device: Programming Adaptor (ILS/SIS)
1. Connect the Programming Adaptor to your PC.
If you are connecting the Programming Adaptor for the first time to the PC, the driver will be
installed automatically now. You can then use the Programming Adaptor.
2. Dismantle the ILS handle set and remove the e-module.
Dismantling the ILS handle set
Dismantling Long shield ILS (using the example of a long-hole bore)
Programming Adaptor
1. Loosen the
FIXTURE RING
2. Remove the
FIXTURE RING
, in that you guide these over the
SUPPORT FRAME
.
INSIDE LEVER HANDLE
with the CES
RING SPANNER
, the
and the
INSIDE SHIELD
Page 15 of 30
.