CEStronics OMEGA FLEX Manual page 19

5 Executing firmware updates for Long shield ILS
4. Start the update program OMEGA Firmware Update.
Starting the firmware-Update
1. Open the program OMEGA F
2. Select the desired device category.
3. Select the desired product.
4. Select the desired programming device with which you want to transmit the firmware
update.
5. Select the desired firmware.
6. Click on U
PDATE
If the selected device and a matching programming device are connected, the firmware
update will now be transmitted.
5. Wait till the OMEGA Firmware Update displays the message that the update was
transmitted successfully.
The locking device restarts now. It is then ready for operation with new firmware.
6. Re-insert the e-module into the ILS handle set.
Insert the e-module
Inserting the e-module
Programming Adaptor
U
IRMWARE PDATE
.
1. Connect the plug to the
.
-
E MODULE
.
Page 19 of 30