e-Flame USA EF-BLT13-36 Owner's Manual page 5

• Remove the outer glass around the bracket and mounting screws (red arrows)
(1) (2) (3)
• Remove the outer glass from the fireplace (4)
• Take out the foam
• Install the outer glass to the fireplace as seem below by lifting the panel and
lining up with the top bracket. Next, fasten panel to the fireplace as shown below,
and screw the brackets to the appliance with mounting screws (red arrows) (1)
(2) (3)
• Please use care with the outer glass bracket screws
5. Plug in the unit then press the power key on the unit or remote control (ensure
that the batteries are installed to remote control). Next, ensure the LED lights are
working correctly.
6. Press the ON/OFF button to turn off the unit, and then pull the plug from the
socket. Store the fireplace in a safe, dry and dust-free location until you are ready
to proceed with the installation.
Text
5