e-Flame USA EF-BLT16 Owner's Manual
  1. Manuals
  2. Brands
  3. e-Flame USA Manuals
  4. Indoor Fireplace
  5. EF-BLT16
  6. Owner's manual

e-Flame USA EF-BLT16 Owner's Manual

Vermont electric fireplace heater
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
VERMONT ELECTRIC FIREPLACE HEATER
MODEL EF-BLT16
OWNER'S MANUAL
NO VENTILATION REQUIRED
PRODUCES SAFE AND EFFICIENT HEAT
110/120-VOLT – 1500-WATT
SAVE THESE INSTRUCTIONS FOR FUTURE USE
NO VENTING REQUIRED
PRODUCES SAFE EFFICIENT HEAT
PLAEASE READ THIS ENTIRE INSTRUCTIONS MANUAL BEFORE USING
110-120VOLT - 1500 WATT
SAVE THESE INSTRUCTIONS FOR FUTURE USE
1

Advertisement

Table of Contents
loading

Related Manuals for e-Flame USA EF-BLT16

Summary of Contents for e-Flame USA EF-BLT16

  • Page 1 VERMONT ELECTRIC FIREPLACE HEATER MODEL EF-BLT16 OWNER’S MANUAL NO VENTILATION REQUIRED PRODUCES SAFE AND EFFICIENT HEAT 110/120-VOLT – 1500-WATT SAVE THESE INSTRUCTIONS FOR FUTURE USE NO VENTING REQUIRED PRODUCES SAFE EFFICIENT HEAT PLAEASE READ THIS ENTIRE INSTRUCTIONS MANUAL BEFORE USING...

  • Page 2: Safety Information

    CONSUMER SARETY INSTRUCTIONS Read this manual before installing and operating this appliance. Failure to follow these instructions may result in electrical shock, property damage, personal injury, and will void the warranty. Do not store or use gasoline, or any other flammable liquids and vapors, in the vicinity of this appliance. Keep this manual for future reference.
  • Page 3 Please refer to the detailed instructions that came with the mantel you purchased. SPECIFICATIONS Dimensions W x D x H 77cm x25cm x62.5cm Net Weight Gross Weight 21 kg / 23.2 kg Voltage 110-120V~ Frequency 60 Hz Watts 1500 W FLANGE INSTALLATION EF-BLT16...

  • Page 4: Installation

    ELECTRICAL CONNECTIONS A 15-amp, 120-volt, 60-hz circuit with a properly grounded outlet is required to operate this heater. Preferably, the fireplace insert will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or blow a fuse when the heater is in operation. This unit comes with a standard 6-foot long 3-wire cord, exiting out the back of the fireplace insert.

  • Page 5: Maintenance Of Motors

    You have the following controls: Turn on/off the device 1. POWER ON/OFF BUTTON - Power to the unit 2. SOUND BUTTON - Press this button to turn on/off the sound effect 3. FLAME BRIGHTNESS ADJUSTMENT - Press the button to change the flame brightness, it has 5 classes flame brightness to adjustable from L5-L4-L3-L2-L1.

  • Page 6: Replacing The Light Bulbs

    2. The motors used on the fan heater and flame blower are pre-lubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the unit around the air intake and exhaust, as well as the fan heater, is recommended. For heavy blows alternating cold and warm air, check the fan for free movement and for debris restricting air flow.
  • Page 7 PROBLEM POSSIBLE CAUSE SOLUTION The fireplace does not operate. The fireplace is not plugged in. Make sure the fireplace is plugged A circuit breaker is tripped or a fuse into a standard 120V outlet. Check is blown. additional appliances on the circuit; The ON/OFF switch is defective.

  • Page 8: Limited Warranty

    LIMITED WARRANTY This warrants to the original purchaser that this product is free from defects in material and workmanship as of the date of purchase and that it will, under normal use and proper care, remain so for 1 year from the date of purchase. Missing or initially defective parts will be replaced free of charge during the period of this limited warranty.
  • Page 9 This product is not intended to be used as a primary heat source. e-Flame USA, it’s directors, officers, or agents, will not be liable to the purchaser or any third party, whether in contract, in tort, or...

Table of Contents