Control Panel Functions - e-Flame USA EF-BLT13-36 Owner's Manual

The power cord must not be pinched or placed against any sharp edges.
Do not blow or place insulation against the electric fireplace.
This electric fireplace is tested and listed for use only with the approved optional
accessories. Use of optional accessories not specifically tested for this electric fireplace
could void the warranty and/or result in a serious safety hazard.

CONTROL PANEL FUNCTIONS

LOCATION – The master power switch is located on the right side of the unit. The
control panel in located on the right corner of the glass.
MASTER SWITCH – The master switch controls the power supply to the electric
fireplace. Turn the switch to "I" to connect the power and turn the switch to "O" to turn
the power off. There will be a chiming sound when turning to "I".
POWER ON/OFF - Touch the button once (flame will light up) to turn the power on for
all functions. Touch the button again to turn all functions off.
FLAME ADJUSTMENT – Touch the button to turn the flame effect on. There are 10
total options for color change. They are as follows:
• F1 – orange
• F2 – orange and green
• F3 – green
• F4 – green and blue
• F5 – blue
• F6 – blue and orange
• F7 – blue, orange and green
• F8 – blue and red
• F9 – red
• F10 – all colors on a loop
8