Related Manuals for e-Flame USA KODIAK EF-TMR02
Summary of Contents for e-Flame USA KODIAK EF-TMR02
- Page 1 KODIAK ELECTRIC FIREPLACE INSERT Models: EF-TMR02 / EF-TMR03 OWNER ’ S MANUAL 120V AC; 60 Hz; Maximum power 1500 Watts All electric. No wood or charcoal. No gas. No venting required.
-
Page 2: Important Safety Information
Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could WARNING result in fire, electric shock, or serious personal injury. Keep this owner’s manual for future reference. If you sell or give this CAUTION product away, make sure this manual accompanies this product. - Page 3 l Use only the electric insert with included mantel. NEVER use a mantel from another maker. l NEVER use this electric fireplace insert unless it is properly installed in the correct mantel. l AVOID INJURY FROM TIPPING! Anchor the TV, or other items, to the wall with the anti-tip kits supplied by the manufacturer.
-
Page 4: Tools Required For Installation
The power cord supplied with the heater has three prongs: two flat blades (live and neutral) and one round pin (ground). If a 3-slot receptacle is not available, an adapter MUST be used. The adapter MUST be properly grounded to the outlet box (see figure at right). -
Page 5: Operation
Fig. 2 Fig. 1 CR2032 NEVER dispose of batteries in fire. Failure to observe this precaution may result in an explosion. Dispose of batteries at your local hazardous material processing center. ALWAYS replace the battery in the remote control with the same type of battery. Failure to do so may result in personal injury or property damage. - Page 6 MOBILE PHONE CONTROL FUNCTIONS Step1. Scan below QR code and download the “Smart Life” app on your mobile phone. Step2. Open the Smart Life app and Log in. If you have existing account, log in directly. Or you need to log in with your WeChat / QQ account, or register follow below steps.
- Page 7 4. The verification code will be sent to your mobile phone or email box, check and enter the right code in 60 seconds, or it will need to be resent 5. Set the password. It should contain 6 to 20 characters, including letters and digits. Then you have registered successfully Step 3.
- Page 8 How to control the fireplace on the app. Power button: Press once to turn on the fireplace. Press again to turn off the fireplace. Heat Settings: 1. Click “Add Device Slide your finger to adjust the temperature from 60 F - 82 F. 2.
- Page 9 Timer: Slide your finger to set the timer function from 0h to 8h. Control Panel, Heat Enabling Switch, and Remote Control Control Panel Remote Control Control Panel and Remote-Control Operation BUTTON OPERATION NOTES / INDICATONS Press the POWER button to turn the The power must be turned ON for the control fireplace on and off.
-
Page 10: Care And Maintenance
press to turn the heater on and off, Turn on the heating function, the fan blows then turn on or off the heating function. hot air, also the fan may continue to blow air Note: The flame effect must be on for for a short time to cool the fireplace after HEAT the heater to work... -
Page 11: Troubleshooting Guide
Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. Electrical and Moving Parts: •... - Page 12 1. Make sure the battery is properly installed, and the plastic tab is removed. 2. Make sure the ON/OFF switch on the control panel is turned on. The remote control will not work unless the ON/OFF The remote control does not switch on the control panel is turned on.
- Page 13 USA, or its directors, or agents have been advised of the possibility of such losses, costs, or damages that exceed the purchase price of the product.