Related Manuals for e-Flame USA EF-FS1511
Summary of Contents for e-Flame USA EF-FS1511
- Page 1 ELECTRIC FIREPLACE HEATER MODEL EF-FS1511 OWNERS MANUAL NO VENTILATION REQUIRED PRODUCES SAFE AND EFFICIENT HEAT PLEASE READ THIS ENTIRE MANUAL BEFORE USING UNIT 120 VOLT / 60 Hz / 750 OR 1500-WATT SAVE THIS MANUAL FOR FUTURE USE...
-
Page 2: Important Safety Information
CONSUMER SARETY INSTRUCTIONS Read this manual before installing and operating this appliance. Failure to follow these instructions may result in electrical shock, property damage, personal injury, and will void the warranty. Do not store or use gasoline, or any other flammable liquids and vapors, in the vicinity of this appliance. - Page 3 13. This heater has hot and potentially sparking parts inside. Do not use the heater in any areas where gasoline, paint, or any other flammable materials are used or stored. 14. Place this heater near a wall outlet so an extension cord is not needed. If an extension cord is necessary, the gauge of the cord must be at least 14AWG, and the rating must be at least 1875-watts.
- Page 4 PREPERATION • Remove all parts and hardware from the carton and place them on a clean, soft, and dry surface. • Make sure all parts are dry, and that the power cord and plug are not damaged. • Compare the contents with the parts list to make sure nothing is missing. •...
- Page 5 OPERATION When the heat function is used for the first time, a slight odor may be NOTICE present. This is normal and should not occur again unless the heater is not used for an extended period of time. BUTTON ACTION/FUNCTION INDICATION / RESULT 1. Press to turn on the flame effect 1. The flame effect is turned on. The and enable heater. The heater power light on switch illuminates. The switches will not work unless this heater is now enabled. ON/OFF switch is turned on. 2. The flame effect, heater, and power 2. Press again to shut off the power lights all turn off. for all functions. 1. With the power turned on, press turn on LOW heat. (The LOW heat 1. The heater and fan turn on to LOW. LOW option must be on in order to utilize HEAT the HIGH heat option). 2. The LOW heat and fan both turn off, but flame effect stays on. 2. Press again to turn off LOW heat. 1. Heater and fan both turn on to 1. With the LOW heat turned on, HIGH HIGH. press to turn on HIGH heat. HEAT 2. The HIGH heat and fan turn off, and 2. Press again to turn off HIGH heat. the LOW heat and flame stay on. TEMPERATURE LIMITING CONTROL This heater is equipped with Temperature Limiting Control.
-
Page 6: Care And Maintenance
CARE AND MAINTENANCE Always turn the heater OFF and unplug the power cord from the outlet before cleaning, changing the lightbulbs, or moving the stove. Failure to do so could result in electric shock, personal injury, or fire. Never immerse in water or spray with water. Doing so could result in electric shock, personal injury, or fire. -
Page 7: Maintenance
MAINTENANCE Risk of electric shock! DO NOT OPEN the main panels! There are no serviceable parts inside (except for lightbulbs). Storage: Store heater in a clean and dry place when not in use. Electric and Moving Parts: The fan and motors are lubricated at the factory, and will not require lubrication for the life of the stove. -
Page 8: Limited Warranty
This product is not intended to be used as a primary heat source. e-Flame USA, it’s directors, officers, or agents, will not be liable to the purchaser or any third party, whether in...