Related Manuals for e-Flame USA EF-BLT12
Summary of Contents for e-Flame USA EF-BLT12
- Page 1 ELECTRIC FIREPLACE HEATER MODEL EF-BLT12 OWNERS MANUAL NO VENTILATION REQUIRED PRODUCES SAFE AND EFFICIENT HEAT PLEASE READ THIS ENTIRE MANUAL BEFORE USING UNIT 110-120 VOLT / 1200-WATT SAVE THIS MANUAL FOR FUTURE USE...
-
Page 2: Important Safety Information
CONSUMER SARETY INSTRUCTIONS Read this manual before installing and operating this appliance. Failure to follow these instructions may result in electrical shock, property damage, personal injury, and will void the warranty. Do not store or use gasoline, or any other flammable liquids and vapors, in the vicinity of this appliance. - Page 3 13. This heater has hot and potentially sparking parts inside. Do not use the heater in any areas where gasoline, paint, or any other flammable materials are used or stored. 14. Place this heater near a wall outlet so an extension cord is not needed. If an extension cord is necessary, the gauge of the cord must be at least 14AWG, and the rating must be at least 1875-watts.
-
Page 4: Manual Controls
MANUAL CONTROLS (1) Power button (2) Timer settings – Heater timer can be programmed in hour increments from 1 to 9 hours. Press button to select desired heater increment. The heater will turn off when programed time has expired. (3) Flame brightness – Press button to increase the brightness of the flame. There are 5 brightness settings (L0, L1, L2, L3, L4). -
Page 5: Maintenance
CLEANING Metal: Buff using a soft cloth, slightly dampened with a citrus oil-based product. DO NOT use brass polish or household cleaners as these will damage the metal. Glass: Use glass cleaner and dry thoroughly with a paper towel or link-free cloth. NEVER use an abrasive cleaner or any cleaner that could scratch the surface. -
Page 6: Limited Warranty
This product is not intended to be used as a primary heat source. e-Flame USA, it’s directors, officers, or agents, will not be liable to the purchaser or any third party, whether in...