Advertisement
Advertisement
Table of Contents
Related Manuals for e-Flame USA EF-BLT10
Summary of Contents for e-Flame USA EF-BLT10
- Page 2 Safety Information 1. Read all instructions before using this heater. 2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater and keep them away from sides and rear.
- Page 3 USER INSTRUCTIONS 1 Any repairs to this appliance should be carried out by qualified/authorized service personnel only. 2. Under no circumstances should this appliance be modified. Parts having to be removed for servicing must be replaced with original “OEM” (original equipment manufacturers) parts only. 3.
-
Page 4: What Is Not Covered
WHAT IS COVERED The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. This electric fireplace must be installed and operated at all times in accordance with the instructions furnished with the product. -
Page 5: Package Contents
Safety Goggles Phillips screwdriver HARWARE INCLUDED Note: Hardware not shown to actual size. PART DESCRIPTION QUANTITY Trim Pieces Small Screws PACKAGE CONTENTS PART DESCRIPTION QUANTITY Fireplace Insert Remote Control AAA Batteries... -
Page 6: Using The Remote Control
ATTACHING FIREBOX TRIMS Attach the top trim piece with the screws provided. Please refer to the detailed instructions that come with the mantel that you purchased. The firebox main power “on/off” switch must be switched “on” before any of the control functions, (on the firebox and/or remote control) will operate. -
Page 7: Glass Information
GLASS INFORMATION Under no circumstances should this product be operated with a broken or chipped glass panel. Do not strike or slam the glass. Do not use abrasive cleansers to clean the glass. Make sure the glass is cool to the touch. This product uses tempered glass. - Page 8 Cleaning Always turn the heater OFF and unplug the power cord from the outlet before cleaning. Cleaning of the control panel, located in the upper right-hand corner of the fireplace is to be done only using a soft cloth, slightly dampened in water (if needed, a small amount of dish soap can be added to the water) and dried using a clean, dry soft cloth.
- Page 9 PROBLEM POSSIBLE CAUSE SOLUTION The fireplace does The fireplace is not plugged in. Make sure the fireplace is plugged in to a standard not operate. 120V outlet. Check additional appliances on the A circuit breaker is tripped or a fuse blown. circuit;...