Sanus Systems VMFL1 Assembly Instructions page 4

Step 6: Attach Monitor Bracket to Wall Plate
Lift the TV so the two hooks on the Monitor Bracket (B) align with the slots on the top of the Wall Plate (A) as shown in Diagram 6A.
Lower the TV so that the hooks on the top of the Monitor Bracket (B) drop into the slots on the Wall Plate (A) but the hooks on the bottom
are not engaged as shown in Diagram 6B.
Step 7: Cable hook up and lock Monitor Bracket to Wall Plate
To allow for greater space between the wall and your display to install cables, allow the display to hang from the two top hooks on the
Monitor Bracket (B) with the bottom tabs free to move as shown in Diagram 7A.
Once all cables are installed, lift the TV just enough to engage the two lower hooks on the Monitor Bracket (B) with the slots in the Wall
Plate (A) as shown in detail 7B
Tighten both M5 Locking Bolts (H) to secure the Monitor Bracket (B) to the Wall Plate (A).
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 02.23.06 (000026)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Diagram 6A
B
A
Diagram 7A
A
B
Diagram 6B
B
A
Diagram 7B
B
A
H