4-SPECIFICATIONS
4.1 Power Requirements:
Electrical – 115 VAC, 60 Hz, 3.6 A
These machines are equipped with a 2.4m
[8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.
4.2 Operating Rate:
Belt speed is 0.40 m/s [78 ft/min]
Actual production rate is dependent on operator's dexterity.
Boxes must be 18 inches (455mm) apart minimum.
4.3 Operating Conditions
IMPORTANT SAFEGUARD
Use in dry, relatively clean environments at 4.4
Note: Machine should not be washed or subjected to conditions causing moisture condensation
on components.
IMPORTANT SAFEGUARD
•
To reduce the risk associated with fi re and explosion hazards:
−
Do not operate this equipment in potentially fl ammable or explosive environments.
4.4 Tape
pressure-sensitive fi lm box sealing tapes.
®
Scotch
4.5 Tape Width:
Minimum – 36mm [1-1/2 inches]
a80b-NA
C to 48.9
C [40
o
o
WARNING
Maximum – 48mm [2 inches]
12
F to 120
F] with clean, dry boxes.
o
o
2011 April