Sun Microsystems SPARCcenter 2000 Manual page 76

Index-2
I
identifying SIMM and NVSIMM
types, 2-13
injector/ejector lever, 2-3
interface, video, D-11
J
jumpers
DSBE/S card, A-2, A-3
NVSIMM battery, 2-15, A-1
system board, A-4
L
limits
altitude, C-2
environmental temperature, C-1
humidity, C-2
link integrity test, A-2
location
board, rules, D-1
module, D-1
lock standoff, 2-3
loss of carrier message, 2-9, 2-21
M
master system board, 1-3
N
net responding message, 2-9, 2-21
NVRAM
remove, 2-19
replace, 2-19
NVSIMM
battery jumper, 2-15
See also SIMM
O
OpenBoot PROM replace, 2-16 to 2-18
operating limits, C-1 to C-2
SPARCcenter 2000 System Board Manual-AOctober 1994
P
part numbers, replacement, 1-4
personal safety, 1-2
pinout
keyboard and mouse connector, B-2
SBus slot connectors, B-4
serial ports A and B, B-3
SuperSPARC modules, B-13
XDBus backplane, B-8
precautions, safety, 1-2
R
rear screen
remove, 2-2
replace, 2-20
replacement parts
locations, 1-5
part numbers, 1-3
restart the system, 2-20
S
safety precautions, 1-1
SBus card
location, D-6
remove and replace, 2-6 to 2-11
retainer, 2-8
SCSI
drive identification, D-10
tray cabling, D-11
selecting
board location, D-1
module location, D-1
serial port connectors pinouts, B-3
SIMM
location, D-8
remove and replace, 2-12 to 2-16
slave system boards, D-5
specifications, environmental, C-1
standoff, using, 2-3
SuperSPARC module
location, D-5