When A Terminal Is Not Present - Sun Microsystems SPARCcenter 2000 Manual

2

2.12.2 When a Terminal Is Not Present

2-22
The following example for a three board system shows the prompt and the
recommended responses (0 and y).
ttya initialized
Need to select system master from the following boards:
Board#0 -- nvram slave, Prom Version nnnnnnnnn
Board#1 -- nvram slave, Prom Version nnnnnnnnn
Board#2 -- nvram slave, Prom Version nnnnnnnnn
Please enter the desired board#: 0
Are you sure? <y/n>: y
Resetting ...
If you enter an illegal board number, or select a board that has no SuperSPARC
modules, OBP will prompt you for another selection.
If only one system board is installed, OBP automatically selects this board as
the new system master.
If there is no terminal on the system, remove all system boards except one from
card cage slot 0 to force OBP to select this board as the new master.
SPARCcenter 2000 System Board Manual—October 1994