Preparing For Installation Or Service; Required Tools; Safety Precautions - Sun Microsystems SPARCcenter 2000 Manual

1.1 Required Tools

1.2 Safety Precautions

!
!

Preparing for Installation or Service

This chapter discusses:
•
Tools
•
Safety precautions
•
System boards
•
Replacement parts
•
Antistatic mat
•
Grounding strap
•
#1 Phillips screwdriver
•
IC extraction tool
Caution – When working on the system board, use an antistatic mat which has
at least 0.25" (6 mm) of cushioning. This cushioning will protect underside
components and prevent harmful board flexing.
Caution – When the system power is turned off, the AC power cord must
remain plugged in to ensure a proper ground.
Protect yourself and the equipment by observing the following precautions.
1
1-1