Download The Latest Software - Atmel QT600 Quick Start Manual

Introduction
Looking to take your design to the next level?
You have made the right choice in purchasing
the Atmel QT600 Development Kit. It allows
®
you to demo Atmel button, slider and wheel
technology and add additional modules/boards.
The kit also to enables you to validate your
own design/board while leveraging the best
touch and microcontroller solutions available.

Download the latest software

To get started, visit http://www.atmel.com/qtouchsuite
• Atmel QTouch Studio ® (version 4.3 or later) - Visual Studio + .NET (version 3.5 or later)
• Atmel AVR Studio (version 4.18 or later) AND ALL Service Packs (SPx)
®
• Atmel QTouch Library (version 4.3 or later)
®
• GNU Compiler – Download at
Atmel QMatrix 8x8
Atmel QTouch8
Atmel ATtiny88
Figure 1 – The Atmel QT600 Evaluation Kit includes these microcontroller and sensor boards
The photo above shows three sets of boards (sensor board and corresponding microcontroller board):
• QTouch8 with the ATtiny88
• QTouch16 with either the ATXMEGA128A1 or the ATmega324
• QMatrix 8x8 with either the ATXMEGA128A1 or the ATmega324
*UC3L MCU board in 2011
1 1
and download four pieces of software:
http://sourceforge.net/projects/winavr/files
Atmel ATmega324
Atmel QT600 interface
Atmel ATXMEGA128A1
Atmel QTouch16