8695 5240 / M
5 - START-UP SAW DC AND AC WELDING
Switch on the installation (according to the different types of connection)
Power unit adjustment
Select the Ø of the welding wire by C14
Select C21 on AS
Select the mode by C13
Select the type striking by C18:
Do not use with the alternating current generators.
Select the type of movement start by C17:
Adjust the wire speed on striking
Adjust the power of the power source on striking by C16
Preadjust the cycle end timer
pre-fulx timet C 19
Burn off timer
Crater filler timer
Wire retract timer C12
NOTE : Preadujst C10, C11, C15, C16 with a low value and readjust after the first welding
SUBARC 5 - DX7
Drooping
Constante
Cold striking
Hot striking
indirect
with contact
by C15
E - OPERATOR MANUEL
E-39