8695 5240 / M
SPECIAL SAFETY INSTRUCTIONS
- After each intervention, make sure that all protective covers are correctly in
place.
- Never remove the insulating plates under welding group and motor supports.
CAUTION : At the end of the spool, the wire may come out brutally (whiplash
effect).
Risk of unwinding when changing an unemptied spool.
- BE CAREFUL with the weight of the spool.
- Put the spool spindle arms back in place after each intervention.
after a maximum of three recyclings.If left
longer than that, there may be serious risks of:.
- fine particles being emitted into the atmosphere, which
might be inhaled,
- less effective welding,
- powder distributing devices being blocked
SUBARC 5 - DX7
It is essential that the flux be changed
B - SAFETY INSTRUCTIONS
B-3