C - Description; Description Of The System - Lincoln Electric SUBARC 5 Instructions For Use And Maintenance Manual

8695 5240 / M

C - DESCRIPTION

1 - DESCRIPTION OF THE SYSTEM

The submerged arc welding installation is made up of the following:
- Welding head assembly
- Connecting bundle
- SA welding control console or
a Digital Control Cycle control console: D2C SAW
- Power cabinet
- Power source
- Power cables
- Additional and optional equipment
A - POWER UNIT.
The power unit consists of 3 parts:
 A power part containing the transformers and their primary and secondary protections,
connection terminals of the external and power supply safeties.
 An electronic part containing the variable speed unit for wire feed, the cycle board of the
process and the connections of the power source, the console and the machine.
 A front panel for adjustments and welding cycle selection.
POWER SOURCE ADAPTATION:
Includ the accessories for power unit fixation on power source and the connections cables
B - CONTROL BOX VERSION SUBARC 5
 The control box groups all the controls
and visualizations needed by the
operator during welding
 This box has a sheet steel casing. It can
be attached on the rear or on bottom
panel on a tube of diameter 42 mm
using plastic collars.
 Front panel made of a screen printed
sheet metal.
SUBARC 5 - DX7
C-5