8695 5240 / M
3 - CONNECTION
On the head:
-
- Connect the cable equipped with a 25-
pins plug to the control box. (version
SUBARC 5)
-
See electrical diagram supplied with the
machine (version D2C SAW)
- Connect the cable with a female connector to
the feed motor.
- Connect the cable for arc voltage
measurement to the power lead item 4
- Connect the welding current cable to the
power lead using a cable of sufficient diameter
for the welding intensity.
CONNECT THE POWER SOURCE:
Refer to the instructions of the power source used for connections:
STARMATIC 650 DC
STARMATIC 1003 AC/DC
STARMATIC 1003/1303 DC
SUBARC 5 - DX7
ISEE N°8695 9044
ISEE N°8695 5225
ISEE N°8695 5220
D - ASSEMBLY CONNECTION
D-23