Module 2: Resolution; Module 3: Static Preset - Leuze electronic BPS 34 Technical Description

Profibus
7.2.3

Module 2: resolution

Description
The resolution function defines the resolution for the position values and performs a
rounding correction.
Parameter
Parameter
Resolution
Table 7.4:
Parameter length: 1 byte
Input Data
none
Output Data
none
7.2.4

Module 3: Static preset

Description
This module is used to preset a value which the BPS is to output after an event (e.g. a 24V
level at the switching input or an event caused by a bit being set in the output data) has
occurred. The value is stored permanently in the BPS.
Parameter
Parameter
Pre-set
value
Table 7.5:
Parameter length: 4bytes
Input Data
none
30
Description
The parameter defines
the resolution for the
position.
Parameters for Module 2
Description
New position value
after preset
Parameters for Module 3
Rel. Data Type
address
0 UNSIGNED 8
Rel. Data Type
address
0 UNSIGNED 32
BPS 34
Leuze electronic
Value Range Standard Unit
1: 0.01
2: 0.1
3: 1
3
4: 10
5: 100
6: 1000
Value Range Standard Unit
0 ...
0
10 000 000
Leuze electronic
mm
mm