Device Arrangement - Leuze electronic BPS 34 Technical Description

Installation
6.2.1

Device Arrangement

Selecting a mounting location
In order to select the right mounting location, several factors must be considered:
• The scanning range determined from the scanning curve must be adhered to at all
locations at which a position determination is to be made
• The BPS should be mounted inclined 10° from vertical towards the barcode band to
ensure that the positioning results are reliably obtained even if the barcode band is
soiled.
Notice!
The best functionality is obtained when:
• the BPS is guided parallel to the band
• the permitted working range is not exited
Notice!
On the BPS 34, the beam is not emitted perpendicular to the cover of the housing, but with
an angle of 10 ° towards the top. This angle is intended to prevent total reflection on the bar-
code band.
20
0 0 8 2
00
2 0 8 0
04
00 28
08
002 8 0 8 02
12 0028 1 6
BPS 34
Leuze electronic
24
00 28
20
Leuze electronic