3-40
Access Procedures
Removing the DC Bus
Capacitors
Removal
1. Remove power from the drive
page
3-3).
2. Remove the covers from the power structures. Refer to
Covers from the Power Structures on page
3. Remove the power structures from the drive cabinet
Power Structures from the Drive Enclosure on page
4. For Power Structure 1, remove the balancing resistor wires from bus
bars.
AC Input
Terminals
(L1, L2, L3)
(Removing Power from the Drive on
3-15.
(Removing the
3-25).
Balancing Resistors
Balancing Resistor Wires
Removing the