Operation; Switching On - Miele SmartLine CS 7101 Operating And Installation Instructions

Switching on


Fire hazard.
Do not leave the wok unattended
whilst it is being used.
 The control for the burner must be
pressed in and turned anti-clockwise
to the large flame symbol to switch
on. The ignitor will "click" and ignite
the gas.
When a control knob is activated, a
spark is developed automatically at all
rings. This is normal and does not in-
dicate a defect.
 When a flame is visible, keep the
control knob pressed in for
5-10 seconds, and then let it go.
 If the burner does not ignite, turn the
control knob back to "". Air the room
or wait at least one minute before try-
ing again. Try keeping the control
knob pressed in for a little longer the
next time.
 If the burner does not ignite the
second time, turn the control knob
back to "" and see "Problem solving
guide".
Switching on during a power outage
If there is an interruption to the electri-
city supply, the gas can be ignited
manually, e.g. with a match.
 Press in the relevant control and turn
it anti-clockwise to the large flame
symbol.
 Hold the control pressed in and light
the gas at the burner with a match.
 Keep the control pressed in for a fur-
ther 5-10 seconds and then release it.

Operation

25