Operation; Operating Principles - Miele KM 7678-2 FL Operating And Installation Instructions

Operating principles

This ceramic cooktop is equipped with
electronic sensor controls which react
to finger contact. For safety reasons,
when switching the appliance on, the
On/Off  sensor needs to be touched
for a little longer than the other sensors.
Each time you touch a sensor, an
acoustic signal sounds.
Only the printed On/Off  symbol is
visible when the cooktop is switched
off. More sensor controls light up when
the cooktop is switched on.

Malfunction due to dirty and/or
covered sensors.
If the sensors are dirty or covered,
this could cause them to fail to react,
to activate a function inadvertently or
even to switch the appliance off
automatically (see "Safety features –
Safety switch-off"). Placing hot pans
on the sensor controls/indicators can
damage the electronic unit
underneath.
Keep the sensors and indicators
clean.
Do not place anything over the
sensors or indicators.
Do not place hot pans over the
sensors or indicators.
a Sensor controls and indicators

Operation

31