Miele SmartLine CS 7101 Operating And Installation Instructions page 37

Safety distances to the sides
and back of the hob
The SmartLine element should prefer-
ably be installed with plenty of space on
the right and left.
The minimum distance  specified be-
low must be observed between the rear
of the SmartLine element and a tall unit
or room wall.
The minimum distance ,  specified
below must be adhered to between one
side of the SmartLine element (right or
left) and a tall unit or room wall. A min-
imum distance of 300 mm must be ob-
served on the opposite side.
 Minimum distance between the back
of the worktop cut-out and the rear
edge of the worktop:
50 mm
 Minimum distance on the right side
between the worktop cut-out and the
closest adjacent piece of furniture (e.g.
tall unit) or a room wall:
200 mm.
 Minimum distance on the left side
between the worktop cut-out and the
closest adjacent piece of furniture (e.g.
tall unit) or a room wall:
200 mm.
Safety distances
Not allowed
Recommended
Not recommended
Not recommended
37