Converting to another gas type
Changing the small jets
Remove the burner components.
Unscrew the burner's fixing screws.
Pull the control knob off.
Loosen the fixing nuts on the under-
side of the appliance.
Carefully remove the underside of the
appliance.
a
c
a Ignition switch
b Small jet with smaller diameter
c Small jet with larger diameter
Remove the ignition switch .
Using a small screwdriver, unscrew
the two small jets in the gas fit-
ting.
Pull out the jets with a pair of pliers.
60
b
Fit the correct jets securely (see jet
table).
Secure the jets against inadvertent
loosening with sealing wax.