Miele SmartLine CS 7101 Operating And Installation Instructions page 53

Flush-fit installation
 Connect the SmartLine element to
the mains.
 If required, connect the SmartLine
element to the gas supply (see "Gas
connection").
 Check that the SmartLine element
works.
 Seal the gaps between the individual
elements and between the elements
and the worktop with a silicone seal-
ant that is heat-resistant to at least
160 °C.
Unsuitable sealant can damage nat-
ural stone.
For natural stone worktops and nat-
ural stone tiles, only use silicone
sealant that is specially formulated
for natural stone. Please follow the
manufacturer's instructions.
Checking operation
 After installation, ignite all burners to
check that they are operating cor-
rectly:
– The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
– On the highest setting, the flame
must have a distinctive and visible
core.
Installation
53