Miele SmartLine CS 7101 Operating And Installation Instructions page 55

Disconnecting from the mains

Danger of electric shock.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:
Safety fuses
 Completely remove fuses
Automatic circuit breakers
 Press the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
 Circuit breakers, type B or C: switch
the on-off switch from 1 (on) to 0 (off).
Residual current device (RCD)
 Switch the main switch from 1 (on) to
0 (off) or press the test button.
Electrical connection
Replacing the mains connec-
tion cable

Danger of electric shock!
The mains connection cable must
only be fitted by a suitably qualified
electrician.
When replacing the mains connection
cable, please use cable type H 05 VV-F
with a suitable cross-section. These
cables are available from the manufac-
turer or from the Miele Spare Parts De-
partment.
55