Miele SmartLine CS 7101 Operating And Installation Instructions page 57

This hob is a class 3 appliance and is
suitable for use with natural gas or li-
quid gas.
Category in acc. with EN 30
United Kingdom, Ireland
II2H3+ 20, 28–30/37
Depending on country of destination
this appliance is set up for connection
to natural or liquid gas. See adhesive la-
bel on the appliance.
Depending on country, a set of jets for
conversion to an alternative type of gas
may be included with the hob. Please
contact your supplier or Miele for the
appropriate conversion jets if neces-
sary. Conversion to another type of gas
is described under "Conversion to an-
other type of gas".
Connecting the hob
The hob is supplied with a conical ¹/₂"
gas connection point for connection to
one of the following:
– Rigid connection with isolation valve
– Flexible connection in accordance
with DIN 3383 Part 1, maximum
length 2000 mm. (Not for the UK!)
Unsuitable sealants may not be leak-
proof.
Connections must be sealed using
appropriate sealant.
Gas connection
a Connection with test point specific-
ally for GB
b 90° bend
Connection with test point specific-
ally for GB and 90 ° bend.
57