Flush-Fit Installation - Miele SmartLine CS 7101 Operating And Installation Instructions

Installation notes

Flush-fit installation

Flush-fit installation is only possible in
natural stone (granite, marble), solid
wood and tiled worktops. For installa-
tion in worktops made of other materi-
als, please consult the relevant manu-
facturer as to whether their worktops
are suitable for flush-fit installation.
The internal width of the base unit un-
derneath the appliance must be at
least as wide as the inner worktop cut-
out (see "Cut-out dimensions for
flush-fit installation"), so that the
SmartLine element is easily accessible
from underneath after installation and
the bottom half of the casing can be
removed for maintenance. If the ele-
ment is not freely accessible from be-
low after installation, the sealant must
be removed so that the element can
be removed.
40
The SmartLine element is
– directly installed in a suitable cut-out
in a natural stone worktop,
– secured in a suitable cut-out in solid
wood and tiled worktops with a
wooden support frame. The frame
must be provided on site, and is not
supplied with the appliance.