Electrical Connection - Miele SmartLine CS 7101 Operating And Installation Instructions

Electrical connection

We recommend that you connect the
SmartLine element to the mains via a
suitable switched electric socket. This
simplifies servicing. The socket must be
easily accessible after the SmartLine
element has been installed.

Danger of injury!
Installation, repairs and other work
by unqualified persons could be dan-
gerous. Miele cannot be held liable
for unauthorised work.
Miele cannot be held liable for dam-
age or injury caused by the lack of or
inadequacy of an on-site earthing
system (e.g. electric shock).
If the plug is removed from the con-
nection cable or if the cable is sup-
plied without a plug, the SmartLine
element must be connected to the
electrical supply by a suitably quali-
fied electrician.
If the socket is no longer accessible,
or if a hard-wired connection is
planned, an additional means of dis-
connection must be provided for all
poles. Suitable means of disconnec-
tion include switches with an all-pole
contact gap of at least 3 mm. These
include miniature circuit breakers,
fuses and relays. The connection
data is quoted on the data plate.
Please ensure these match the
household mains supply.
After installation ensure that all elec-
trical components are shielded and
cannot be accessed by users.
54
Total power rating
See data plate
Connection data
The connection data is quoted on the
data plate. Please ensure these match
the household mains supply.
Residual current device
For extra safety, it is advisable to pro-
tect the SmartLine element with a suit-
able residual current device (RCD) with
a trip range of 30 mA.
WARNING!
THIS APPLIANCE MUST BE
EARTHED