VNX5500 components
VNX5500 components
8
EMC VNX5500 Parts Location Guide
Viewing from the bottom to the top, the Block and File VNX5500 platform includes several
components. The following sections discuss each component in an illustration and table.
The illustration will show or point out the location of the part number label on the
component. The table will list the part number, describe the component or part, and tell
you if it is a FRU or CRU or both.
Dual 1U Standby power supply (SPS)
◆
3U Disk processor enclosure (DPE)
◆
• 3U, 15 (3.5-inch) disk drive
• 3U, 25 (2.5-inch) disk drive
• Storage processor (SP) power supply/cooling module
• Storage processor
1U Control Station (CS)
◆
2U Data Mover enclosure (DME)
◆
• DM power supply/cooling module
• DM CPU module
• Management module
I/O modules
◆
• SP I/O modules
• DM I/O modules
Small form-factor pluggable (SFP) transceiver modules
◆
Dual in-line memory modules (DIMMs)
◆
• SP DIMMs
• DM DIMMs
Disk-array enclosures (DAEs)
◆
• 3U, 15 (3.5-inch) disk drive
• 2U, 25 (2.5-inch) disk drive
• 4U, 60 (2.5- or 3.5-inch) disk drive
Need help?
Do you have a question about the VNX5500 and is the answer not in the manual?