EMC VNX5500 Parts Location Manual page 21

Table 11 Data Mover enclosure part numbers rear view (continued)
Part number label
location
(Figure 18) Part number
4 303-122-100A
5 100-562-718
100-563-228
303-121-100A
303-081-103B
303-195-100B
303-164-104D-01
1. This part is not shown in the example Data Mover enclosure illustration in
view, go to Figure 21 on page
2. This part is not shown in the example Data Mover enclosure illustration in
view, go to Figure 22 on page
3. This part is not shown in the example Data Mover enclosure illustration in
view, go to Figure 29 on page
4. This part is not shown in the example Data Mover enclosure illustration in
view, go to Figure 28 on page
Description
Two-port 1-Gb/s copper plus
two-port 1G/bs optical I/O module
(for a closer view, see
page 28)
I/O module filler includes Do Not
Remove label
Note: This filler panel is only used
when the Data Mover I/O module
slots are empty.
1
Four-port 10/100/1000 Base-T
copper I/O module (for a closer
view, see Figure 21 on page
2
Two-port 10-Gb/s Ethernet Optical
I/O module (for a closer view, see
Figure 25 on page
3
Two-port 10-Gb/s Ethernet optical
or Twinax I/O module (for a closer
view, see Figure 29 on page
4
Two-port 10-Gb/s RJ-45 Base-T
iSCSI/IP (for a closer view, see
Figure 28 on page
25.
26.
33.
32.
EMC VNX5500 Parts Location Guide
Data Mover enclosure
FRU

Figure 24 on


25)

29)

33)

32)
Figure 18 on page 20. For a closer
Figure 18 on page 20. For a closer
Figure 18 on page 20. For a closer
Figure 18 on page 20. For a closer
CRU






21