EMC VNX5500 Parts Location Manual page 48

Disk-array enclosure (DAE)
48 EMC VNX5500 Parts Location Guide
Disk drive
To access the disk drives, first slide out the 40U, 60 DAE from the rack. Then, push the top
cover towards the rear of the chassis. The disk drives are located on either sides of the
LCCs in the DAE (Figure 41 on page
Figure 43 shows the location of the 4U, 60 DAE disk drive part number label.
Part number (P/N) label
Figure 43 Example of the 4U, 60 DAE disk drive part number label location
Table 30 lists the part number label location, part number, description, and whether it is a
FRU or CRU.
IMPORTANT
Due to the extensive variety of disk module types,
recommends that you refer to the latest
Systems Disk and OE Matrix Guide
configuration.
Table 30 DAE 4U, 60 disk module part numbers
Part number label
location
(Figure 43) Part number
005049284
005049207
Note: The description field describes the disk module type, capacity, drive type, and spindle
speed (rpm).
Fan control module
To access the fan control modules, first slide out the 40U, 60 DAE from the rack. Then,
push the top cover towards the rear of the chassis. The fan control modules are located in
the front of the DAE (Figure 41 on page
47).
Table 30 only lists two disk types. EMC
EMC VNX5100 and VNX5300 Series Storage
to ensure that you have the correct part for your
Description (see note)
600 GB, 6 Gb/s SAS, 10k rpm
900 GB, 6 Gb/s SAS, 10K rpm
47).
VNX-000672
FRU CRU
 
 