EMC VNX5500 Parts Location Manual page 20

Data Mover enclosure
Rear view
20 EMC VNX5500 Parts Location Guide
Note: The DM CPU part numbers are located on the DM CPU sheet metal. You must remove
the DM from the DM enclosure
number label located inside the DM CPU by looking through the blue plastic DIMM cover.
The part number label is located on the motherboard.
Table 10 Data Mover CPU part number
Part number label
location Part number
Figure 14 on 110-113-103B
page 17
Figure 17 on 303-113-101B
page 19
Figure 18 shows the rear view of a 2U Data Mover enclosure.
Figure 18 Data Mover enclosure rear view
Table 11 shows the part number label location, part number, description, and whether it
is a FRU or CRU.
Table 11 Data Mover enclosure part numbers rear view
Part number label
location
(Figure 18) Part number
1 100-562-178
2 110-130-100B
3 303-092-102B
(Figure 17 on page 19). You can also find the DM CPU part
Description
Data Mover 2.13-GHz CPU module
with 12 GB of memory
Data Mover 2.13-GHz CPU without
memory
1 2
Description
Data Mover enclosure (empty)
Management module (for a closer
view, see Figure 19 on page
Four-port 8-Gb/s Fibre Channel (FC)
I/O module (for a closer view, see
Figure 20 on page
FRU

3 4
FRU


22)

24)
CRU
5
CNS-001724
CRU

