Advertisement
1
6. Tighten 1/4" bolts.
9. Check assembly for square.
12. Repeat steps to install remaining bracket.
Revision date: 08.26.15
Assembly Instructions
7. Check square tube position.
10. Secure bracket in place using two (2)
more Tek screws.
13. Assemble remaining bench top supports.
8. Install one FA4482B Tek screw in center.
11. Flip assembly over and repeat Steps 8-10
to secure remaining tube to brackets.
S125P057G14
The 12' bench has four
support assemblies. The 8'
and 10' benches each have
three supports.
NOTE: Photo shows assembled support.
5
Advertisement
