Advertisement
4
INSTALL LONG BENCH TOP SUPPORT TUBES—CONTINUED
7. Take another Tek screw and secure the clip
to the long support tube. Tighten screw until
snug.
10. Install the remaining outer bench top support
tube.
NOTE: Verify that each square tube is secured
to each crossbar of the frame.
Revision date: 08.26.15
Assembly Instructions
8. Remove the clamp and move to the opposite
end of the frame and repeat the steps to install
that clip.
11. After installing the two outer tubes, measure
to find the center of each crossbar. Mark the
location.
9. Next, move to the mid support assembly and
install a clip at that location. (The 12' long
frame has two mid supports.)
12. Place the middle support in place on the
frame.
11
Advertisement
